DRDO RAC Scientist B Syllabus 2023: Check  Eligibility, Exam Pattern & Selection Process

DRDO RAC Scientist B Syllabus 2023: Download the 2023 DRDO RAC Scientist B Syllabus in PDF format: For employment as a Scientist B, the Defence Research & Development Organization (DRDO), Recruitment Assessment Centre (RAC), officials have published an advertisement. On the official website, the syllabus for the Scientist B Exam administered by the Defence Research & Development Organization (DRDO), Recruitment Assessment Centre (RAC), is available.

The Defence Research & Development Organization (DRDO), Recruitment Assessment Centre (RAC) Scientist B Syllabus & Exam Pattern can be found in the sections below for candidates to review and download. In order to make it simple, we have included the DRDO RAC Scientist B Exam Syllabus download link below the section. For immediate updates on the DRDO RAC Scientist B Syllabus, stay tuned to our website.

About DRDO Exam

The full form of DRDO is the Defense Research & Development Organization. It is a National Level Entrance Examination conducted by the Defence Research and Development Organization of the Ministry of Defence for the position of Junior Research Fellow.

DRDO dedicatedly works towards enhancing self-reliance in Defence Systems and undertakes design & development leading to the production of world-class weapon systems and equipment per the expressed needs and the qualitative requirements laid down by the three services.

DRDO RAC Scientist B Syllabus & Exam Pattern 2023 – Overview

DRDO RAC Scientist B Exam Pattern 2023

The DRDO RAC Scientist B question paper of the recruitment test will be 600 questions with a Maximum mark of 600 marks and All questions carry equal marks. The Exam duration of the DRDO RAC Scientist B paper will be 6 Hours. for each wrong answer, – marks will be deducted. Below the given table is for the DRDO RAC Scientist B Exam Pattern 2023.

• Total Question – Questions
• Total Marks – 600 marks
• Exam Duration – 6 Hours
• Language –
• Mode of Exam –
• Negative Marking –

DRDO 2023 Exam Date

DRDO 2023 Exam Date will be announced by the organizing authorities soon. DRDO exam date 2023 for all the events will be mentioned below.

DRDO 2023 Notification

On the official website, DRDO exam 2023 notice will soon be made available. All information pertaining to the hiring process will be included in the official DRDO 2023 notification.

A job announcement for Trade Apprentices has been made by DRDO at the Naval Physical and Oceanographic Laboratory (NPOL), Kochi. According to the notice, there are 41 open positions at the DRDO for Trade Apprentices. The following table contains information about the Trade Apprentice positions open at DRDO in 2023.

DRDO Working Areas

Aeronautics, armaments, combat vehicles, electronics, instrumentation engineering systems, missiles, materials, naval systems, advanced computing, simulation, and life sciences are just a few of the military technology fields in which DRDO is active. Every year, the DRDO holds a National Level Entrance Examination.

DRDO has its headquarters at DRDO Bhavan, New Delhi, India. DRDO conducts the examination every year to hire skilled graduates from all over India for the post of Junior Research Fellows.

Subject Wise – DRDO RAC Scientist B Syllabus 2023

• Mechanical Engineering

PAPER – I

1. Fluid Mechanics: Basic Concepts and Properties of Fluids, Manometry, Fluid Statics, Buoyancy, Equations of Motion, Bernoulli’s equation and applications, Viscous flow of incompressible fluids, Laminar and Turbulent flows, Flow through pipes, and head losses in pipes.

2. Thermodynamics and Heat transfer: Thermodynamic systems and processes; properties of pure substance; Zeroth, First and Second Laws of Thermodynamics; Entropy, Irreversibility and availability; analysis of thermodynamic cycles related to energy conversion: Rankine, Otto, Diesel, and Dual Cycles; ideal and real gases; compressibility factor; Gas mixtures. Modes of heat transfer, Steady and unsteady heat conduction, Thermal resistance, Fins, Free and forced convection, Correlations for convective heat transfer, Radiative heat transfer – Radiation heat transfer co-efficient; boiling and condensation, Heat exchanger performance analysis.

3. IC Engines, Refrigeration and Air conditioning: SI and CI Engines, Engine Systems and Components, Performance characteristics and testing of IC Engines; Fuels; Emissions and Emission Control. Vapour compression refrigeration, Refrigerants and Working cycles, Compressors, Condensers, Evaporators, and Expansion devices, and Other types of refrigeration systems like Vapour Absorption, Vapour jet, thermo electric and Vortex tube refrigeration. Psychometric properties and processes, Comfort chart, Comfort and industrial air conditioning, Load calculations and Heat pumps.

4. Turbo Machinery: Reciprocating and Rotary pumps, Pelton wheel, Kaplan and Francis Turbines, velocity diagrams, Impulse and Reaction principles, Steam and Gas Turbines, Theory of Jet Propulsion – Pulse jet and Ram Jet Engines, Reciprocating and Rotary Compressors – Theory and Applications

5. Power Plant Engineering: Rankine and Brayton cycles with regeneration and reheat, Fuels and their properties, Flue gas analysis, Boilers, steam turbines, and other power plant components like condensers, air ejectors, electrostatic precipitators and cooling towers – their theory and design, types and applications;

6. Renewable Sources of Energy: Solar Radiation, Solar Thermal Energy collection – Flat Plate and focusing collectors their materials and performance. Solar Thermal Energy Storage, Applications – heating, cooling and Power Generation; Solar Photovoltaic Conversion; Harnessing of Wind Energy, Bio-mass and Tidal Energy – Methods and Applications, Working principles of Fuel Cells.

Recent Article: All About MRNAT Exam

PAPER – II

7. Engineering Mechanics: Analysis of System of Forces, Friction, Centroid and Centre of Gravity, Dynamics; Stresses and Strains-Compound Stresses and Strains, Bending Moment and Shear Force Diagrams, Theory of Bending Stresses- Slope and deflection-Torsion, Thin and thick Cylinders, Spheres.

8. Engineering Materials: Basic Crystallography, Alloys and Phase diagrams, Heat Treatment, Ferrous and Non-Ferrous Metals, Nonmetallic materials, Basics of Nano-materials, Mechanical Properties and Testing, Corrosion prevention and control

9. Mechanisms and Machines: Types of Kinematics Pair, Mobility, Inversions, Kinematic Analysis, Velocity and Acceleration Analysis of Planar Mechanisms, CAMs with uniform acceleration and retardation, cycloidal motion, oscillating followers; Vibrations –Free and forced vibration of undamped and damped SDOF systems, Transmissibility Ratio, Vibration Isolation, Critical Speed of Shafts. Gears – Geometry of tooth profiles, Law of gearing, Involute profile, Interference, Helical, Spiral, and Worm Gears, Gear Trains- Simple, compound, and Epicyclic; Dynamic Analysis – Slider – crank mechanisms, turning moment computations, balancing of Revolving & Reciprocating masses, Gyroscopes –Effect of Gyroscopic couple on automobiles, ships, and aircraft, Governors.

10. Design of Machine Elements: Design for static and dynamic loading; failure theories;  fatigue strength and the S-N diagram; principles of the design of machine elements such as riveted, welded, and bolted joints. Shafts, Spur gears, rolling and sliding contact bearings,  Brakes, and clutches, flywheels.

11. Manufacturing, Industrial, and Maintenance Engineering: Metal casting-Metal forming, Metal Joining, Machining, and machine tool operations, Limits, fits and tolerances, Metrology and inspection, computer Integrated manufacturing, FMS, Production planning and Control Inventory control and operations research – CPM-PERT. Failure concepts and characteristics Reliability, Failure analysis, Machine Vibration, Data acquisition, Fault Detection, Vibration Monitoring, Field Balancing of Rotors, Noise Monitoring, Wear and Debris Analysis, Signature Analysis, and NDT Technique in Condition Monitoring.

12. Mechatronics and Robotics: Microprocessors and Microcontrollers: Architecture, programming, I/O, Computer interfacing, Programmable logic controller. Sensors and actuators, Piezoelectric accelerometer, Hall effect sensor, Optical Encoder, Resolver,  Inductosyn, Pneumatic and Hydraulic actuators, stepper motor, Control Systems- Mathematical modeling of Physical systems, control signals, controllability and observability. Robotics, Robot Classification, Robot Specification, notation; Direct and Inverse Kinematics; Homogeneous Coordinates and Arm Equation of four Axis SCARA Robot.

Recent Post: Management Course After 12th

2) Electronic and Communication Engineering

PAPER – I

1. Basic Electronics Engineering: Basics of semiconductors; Diode/Transistor basics and characteristics; Diodes for different uses; Junction & Field Effect Transistors (BJTs, JFETs, MOSFETs); Transistor amplifiers of different types, oscillators, and other circuits; Basics of Integrated Circuits (ICs); Bipolar, MOS and CMOS ICs; Basics of linear ICs, operational amplifiers and their applications-linear/non-linear; Optical sources/detectors; Basics of Optoelectronics and its applications.

2. Basic Electrical Engineering: DC circuits ohm’s & Kirchoff’s laws, mesh and nodal analysis, circuit theorems; Electromagnetism, Faraday’s & Lenz’s laws, induced EMF and its uses; Single-phase AC circuits; Transformers, efficiency; Basics-DC machines, induction machines, and synchronous machines; Electrical power sources- basics: hydroelectric, thermal, nuclear, wind, solar; Basics of batteries and their uses.

3. Materials Science: Electrical Engineering materials; Crystal structure & defects; Ceramic materials-structures, composites, processing and uses; Insulating laminates for electronics, structures, properties and uses; Magnetic materials, basics, classification, ferrites, Ferro/para-magnetic materials and components; Nano materials-basics, preparation purification, sintering, nanoparticles and uses; Nano-optical/magnetic/electronic materials and uses; Superconductivity, uses.

4. Electronic Measurements and Instrumentation: Principles of measurement, accuracy, precision, and standards; Analog and Digital systems for measurement, measuring instruments for different applications; Static/dynamic characteristics of measurement systems, errors, statistical analysis, and curve fitting; Measurement systems for nonelectrical quantities; Basics of telemetry; Different types of transducers and displays; Data acquisition, system basics.

5. Network Theory: Network graphs & matrices; Wye-Delta transformation; Linear constant coefficient differential equations- time domain analysis of RLC circuits; Solution of network equations using Laplace transforms- frequency domain analysis of RLC circuits; 2-port network parameters-driving point & transfer functions; State equations for networks; Steady state sinusoidal analysis.

6. Analog and Digital Circuits: Small signal equivalent circuits of diodes, BJTS, and FETs; Diode circuits for different uses; Biasing & stability of BJT & JFET amplifier circuits; Analysis/ design of amplifier- single/multi-stage; Feedback& uses; Active filters, timers, multipliers, wave shaping, A/ D-D/ A converters; Boolean Algebra& uses; Logic gates, Digital IC families, Combinatorial/sequential circuits; Basics of multiplexers, counters/ registers/memories/microprocessors, design& applications.

PAPER – II

1. Analog and Digital Communication Systems: Random signals, noise, probability theory, information theory; Analog versus digital communication & applications: Systems- AM, FM, transmitters/receivers, theory/practice/ standards, SNR comparison; Digital communication basics: Sampling, quantizing, coding, PCM, DPCM, multiplexing-audio/video; Digital modulation: ASK, FSK, PSK; Multiple access: TDMA, FDMA, CDMA; Optical communication: fiber optics, theory, practice/standards.

2. Control Systems: Classification of signals and systems; Application of signal and system theory; System realization; Transforms& their applications; Signal flow graphs, Routh-Hurwitz criteria, root loci, Nyquist/Bode plots; Feedback systems-open &close loop types, stability analysis, steady state, transient and frequency response analysis; Design of control systems, compensators, elements of lead/lag compensation, PID and industrial controllers.

3. Computer Organization and Architecture: Basic architecture, CPU, I/O organization, memory organization, peripheral devices, trends; Hardware /software issues; Data representation& Programming; Operating systems-basics, processes, characteristics, applications; Memory management, virtual memory, file systems, protection & security; Databases, different types, characteristics, and design; Transactions and concurrency control; Elements of programming languages, typical examples.

4. Electro Magnetics: Elements of vector calculus, Maxwell’s equations-basic concepts; Gauss’, Stokes’ theorems; Wave propagation through different media; Transmission Lines-different types, basics, Smith’s chart, impedance matching/ transformation, S-parameters, pulse excitation, uses; Waveguides-basics, rectangular types, modes, cut-off frequency, dispersion, dielectric types; Antennas-radiation pattern, monopoles/ dipoles, gain, arrays-active/ passive, theory, uses.

5. Advanced Electronics Topics: VLSI technology: Processing, lithography, interconnects, packaging, testing; VLSI design: Principles, MUX/ROM/PLA-based design, Moore & Mealy circuit design; Pipeline concepts & functions; Design for testability, examples; DSP: Discrete-time signals/systems, uses; Digital filters: FIR/IIR types, design, speech/audio/radar signal processing uses; Microprocessors & microcontrollers, basics, interrupts, DMA, instruction sets, interfacing; Controllers & uses; Embedded systems.

6. Advanced Communication Topics: Communication networks: Principles /practices /technologies /uses /OSI model/security; Basic packet multiplexed streams/scheduling; Cellular networks, types, analysis, protocols (TCP/TCPIP); Microwave & satellite communication: Terrestrial/space type LOS systems, block schematics link calculations, system design; Communication satellites, orbits, characteristics, systems, uses; Fibreoptic communication systems, block schematics, link calculations, system design.

• Computer Science and Engineering

PAPER I

1. Engineering Mathematics a. Linear Algebra: Matrices, Determinants, a system of linear equations, eigenvalues and eigenvectors, LU decomposition, orthonormal bases, Transforms – Fourier, DCT, wavelets.
b. Calculus: Limits, continuity, differentiability, maxima and minima, mean value theorem, integration. Vector calculus – gradient, divergence, curl, integral theorems.
c. Probability: Random variables, probability distributions – uniform, normal, exponential, Poisson, binomial. Mean, median, mode, standard deviation. Conditional probability and Bayes theorem. Information theory: Shannon entropy, information, conditional information.
2. Discrete Mathematics: Propositional and first-order logic. Sets, relations, functions, partial orders and lattices, groups. Graphs: connectivity, matching, coloring. Combinatorics: counting, recurrence relations, generating functions
3. Digital Logic: Boolean algebra. Combinational and sequential circuits. Minimization. Number representation and computer arithmetic (fixed and floating point).
4. Computer Organization and Architecture Machine instructions and addressing modes. Assembly language. ALU, data path, and control unit. Instruction pipelining. Memory hierarchy: cache, main memory, and secondary storage. I/O interface (interrupt and DMA modes). RISC, CISC, parallel architectures.
5. Programming and Data Structures Programming in C: functions, structures, memory management, recursion, arrays, stacks, queues, linked lists, trees, binary search trees, binary heaps, and graphs. Object-oriented programming basics.
6. Algorithms: Searching, sorting, hashing. Asymptotic worst case, time and space complexity. Algorithm design, techniques: greedy, dynamic programming, and divide‐and‐conquer. Graph search, minimum spanning, trees, shortest paths.

PAPER‐II

1. Compiler Design: Lexical analysis, parsing, syntax‐directed translation. Runtime environments, intermediate code generation.
2. Operating System: Processes, threads, inter‐process communication, concurrency and synchronization, deadlocks. CPU scheduling. Memory management and virtual memory. File systems. Virtual machines and hypervisors. Secure operating systems.
3. Theory of Computation: Regular expressions and finite automata. Context‐free grammar and push‐down automata. Regular and context‐free languages, pumping lemma. Turing machines and undecidability.
4. Databases: ER‐model. Relational model: relational algebra, tuple calculus, SQL. Integrity constraints. Normal forms. File organization, indexing (eg, B and B+ trees). Transactions and concurrency controls.
5. Computer Networks: Concept of layering, OSI model. LAN technologies (Ethernet). Flow and error control techniques, switching. IPv4 / IPv6, routers, and routing algorithms (distance vector, link state). TCP/UDP and sockets, congestion control. Application layer protocols (DNS, SMTP, POP, FTP, HTTP). Basics of WiFi.
6. Security of Cyber-Systems: Cyber security principles, Kerberos, RADIUS, secure protocols (IPSec, SSH, SSL), basics of public key and private key cryptography, hash functions, blockchains, digital signatures, certificates. Firewalls, intrusion detection systems, basics of IoT security, and Cloud security. Threats, vulnerabilities, malicious software. Attacks: buffer overflow, DoS, DDoS, SQL injection, web application attacks
7. AI and Machine Learning: Classification and clustering techniques, dimensionality reduction: PCA, SVD. Correlation and regression analysis. Training and test data: overfitting, underfitting. Search. Ontology. Decision trees. Artificial Neural networks: activation function, multi‐layer perceptron, deep learning. Application of artificial neural networks.

Electrical Engineering

Electrical Engineering consists of the following topics in the recruitment examination- Signals and Systems, Control Systems, Power Systems, Electric Circuits and Fields, Electrical and Electronic Measurements, Power Electronics and Drives, and Electrical Machines.

Instrumentation Engineering

• Transducers, Mechanical Measurement and Industrial Instrumentation
• Analog Electronics
• Basics of Circuits and Measurement Systems
• Control Systems and Process Control
• Digital Electronics
• Signals, Systems, and Communications
• Analytical, Optical, and Biomedical Instrumentation
• Electrical and Electronic Measurements

Overview through Main Headings

Chemical Engineering (CH)

• Process Calculations and Thermodynamics
• Fluid Mechanics and Mechanical Operations
• Heat Transfer
• Mass Transfer
• Chemical Reaction Engineering
• Instrumentation and Process Control
• Plant Design and Economics
• Chemical Technology

Computer Science and Engineering (CS)

• Theory of Computation
• Digital Logic
• Computer Organization and Architecture
• Programming and Data Structures Algorithms
• Compiler Design
• Databases
• Computer Networks

Electronics and Communication Engineering (EC)

• Networks
• Electronic Devices
• Analog Circuits
• Digital Circuits
• Signals and Systems
• Control Systems
• Communications
• Electromagnetics

Electrical Engineering (EE)

• Electric Circuits and Fields
• Signals and Systems
• Electrical Machines
• Power Systems
• Control Systems
• Electrical and Electronic Measurements
• Power Electronics and Drives

Mechanical Engineering (ME)

• Engineering Mechanics
• Strength of Materials
• Theory of Machines
• Vibrations
• Design
• Fluid Mechanics
• Heat-Transfer
• Thermodynamics
• Applications
• Engineering Materials
• Metal Casting
• Forming
• Joining
• Machining and Machine Tool Operations
• Metrology and Inspection
• Computer Integrated Manufacturing
• Production Planning and Control: Inventory Control
• Operations Research

Instrumentation Engineering (IN)

• Basics of Circuits and Measurement Systems
• Transducers, Mechanical Measurement and Industrial Instrumentation
• Analog Electronics
• Digital Electronics
• Signals, Systems and Communications
• Electrical and Electronic Measurements
• Control Systems and Process Control
• Analytical, Optical and Biomedical Instrumentation

DRDO RAC Scientist B Syllabus 2023 – Download Link

DRDO 2023 Exam Result

DRDO 2023 exam results will be announced online by the conducting authority soon after the successful conduction of the examination. Candidates can check their results by following the given steps.

• Step 1: Candidates have to visit the official website.
• Step 2: Login using the credentials (username and password) given at the time of registration.
• Step 3: In the notification section of the homepage choose the results link.
• Step 4: The result will be displayed next to the admit card number.
• Step 5: View the result and take a printout of it for further usage.

The Defence Research & Development Organisation will release the DRDO 2023 answer key on its official website. Candidates can view the answer key and download it from the official website by logging into the site with the credentials provided at the time of registration. Candidates can cross-check their answers with the ones in the answer key to arrive at the possible score in order to get a brief idea about the result.

A separate interview is conducted for all the candidates who cleared the DRDO 2023. For information purposes, the candidates who don’t clear the DRDO 2023 exam, their status would be marked as “Not Qualified” in their DRDO 2023 Exam Result.

DRDO 2023 Recruitment Salary

Payscale: DRDO offers a pay scale of INR 34,000 per month which will be different as per the post (Scientist B, C, D, E).

Notifications: The DRDO 2023 Recruitment Notification will be released soon.